收藏本站
热门搜索: A3500  E1910  A1360  25200056  dmem  

10x ELISA WASH BUFFER

 
包装: 100 ml
运保温度: +4oC
到货周期: 登录后查看
标准价: ¥客户可见
会员价: ¥客户可见
积分: 客户可见
 
登录之后可加入购物车购买,请您 
对比 收藏

运费与支付说明:

1.含干冰类产品有运费;

2. 必须现金付款或有信用额度的会员才可以直接发货,否则需要等待现金付款信息。

描述:

Product Form

10 x concentration - liquid

Preservative Stabilisers

1.0% 2-chloroacetamide

Buffer Solution

Phosphate buffered saline

Intended Use

ELISA wash buffer was developed as a high performance washing solution for use in all ELISA formats. The optimised formulation of pH stabilizers, salts and detergents increases the efficiency of washing stages during ELISA, leading to a reduction in background noise and an increased specific signal.

BUF031A is compatible with all routinely used conjugate components such as HRP, Avidin and Alkaline Phosphatase.

 

Application

This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visitwww.abdserotec.com/protocols.

 

Application Name Yes No Not Determined Suggested Dilution
ELISA        
Where this antibody has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the antibody for use in their own system using appropriate negative/positive controls.

Storage

Store at +4oC.

DO NOT FREEZE

This product should be stored undiluted. Should this product contain a precipitate, heat gently until dissolved. Do not boil.

Shelf Life

24 months from date of despatch.

Instructions For Use

1. Dilute the required volume of BUF031A 1:10 with deionised water (1 part BUF031A to 9 parts water) and mix.

2. Use at each ELISA wash step for a total of 2-4 washes. Fill each well with the diluted wash buffer (approximately 400ul), taking care not to submerge the plate as this can cross-contaminate the wells. The buffer may be dispensed manually or by an automated system.

3. Between washes, aspirate or dump the buffer. After the final wash blot the plate on paper towels to remove any excess liquid.

Health And Safety Information

Material Safety Datasheet Documentation #10385 available at: 
http://www.abdserotec.com/uploads/MSDS/10385.pdf

Regulatory

For research purposes only

 

 

 


相关图片

说明书

参考文献

本产品可用于的实验

购此产品的人还购买了
最近浏览产品

京ICP备15036693号-2    京公网安备11010802025653    版权所有:北京逸优科技有限公司       0.12

 纠 错