收藏本站
热门搜索: A3500  E1910  A1360  25200056  dmem  

1升容量一次性转瓶

 
包装:
运保温度: RT
到货周期: 登录后查看
标准价: ¥客户可见
会员价: ¥客户可见
积分: 客户可见
 
登录之后可加入购物车购买,请您 
对比 收藏

运费与支付说明:

1.含干冰类产品有运费;

2. 必须现金付款或有信用额度的会员才可以直接发货,否则需要等待现金付款信息。

描述:

The Corning 1L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials.

 

  • Preassembled Flasks have one aseptic connector preassembled to one side arm. Opposite side arm has a flat cap. (Cat. No. 3568)

  • Recommended working range of 300mL to 1L.

  • Extended paddle design ensures constant top-to-bottom motion of the liquid without having to adjust the height of the paddle.

  • Bottom contours on the paddle hug the shape of the flask, eliminating dead spots.

  • Two wide neck openings for easy pouring; easily accept a 100mL pipet.

  • Vertical side baffles break up laminar flow - ensures better mixing and maximizes cell production.

  • Each system is supplied individually double bagged.

  • Sterilized by gamma irradiation; have the highest Sterility Assurance Level (SAL) of 10-6 and meets USP XXIV:71 Bacteriostasis, Fungistasis and Sterility Standards.

  • Single use only. Flasks cannot be autoclaved or resterilized with alcohol. Any attempt to do so will result in degradation of the materials.

  • Optional Vented Caps (Cat. No 3567) and Aseptic Transfer Caps (Cat. No. 3562) are available.

Aseptic Transfer Caps are sterile (10-6 SAL), individually double bagged and fit the side arms on 1L Corning® Disposable Spinner Flasks (Cat. No. 3561).

  • Cap is made of high density polyethylene; autoclaving is not recommended.

  • The venting port ends in a 25mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting.

  • The liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch OD chemically resistant, heat sealable flexible tubing, ending in a male luer lock (MLL) connector closed with a female luer sealing cap.


相关图片

说明书

参考文献

本产品可用于的实验

购此产品的人还购买了
最近浏览产品

京ICP备15036693号-2    京公网安备11010802025653    版权所有:北京逸优科技有限公司       0.04

 纠 错